Flydigi
LB User Guide Joystick STEP1: Download Flydigi Game Center B Scan the QR code to download and install Flydigi Game Center A Logo (LED indicator) Power switch App Store LT Lock Google Play STEP 2：Connect to device via Bluetooth In Flydigi Game Center > Gamepad, tap Connect and follow the instructions displayed to connect the gamepad.
STEP 3：Activate button mapping (Android users only) iOS users please skip to STEP 4 STEP 4：Install the gamepad 1. Press the lock button to pop up the handle. Follow the activation instructions in Flydigi Game Center - Key Mapping to enable USB debugging and complete the activation. Pull out the Utool cable from Wasp 2, plug it into the charging port of your device, then turn on the gamepad. *If your device has Micro-USB only, you need to purchase an additional Type-C to Micro USB adapter.
STEP 5：Start game For a better gaming experience, please launch the game in Flydigi Game Center. Accessories Installation Instructions This part is only applicable to Elite version. M Follow the steps in the diagram to insert the buckle of the M button into the holder at the back of the gamepad and the M button will be automatically placed in the correct position.
Basic Operations and LED indicator Status Switch the power button to the left. LED indicator blinks and gamepad powers on. Switch the power button to the right. LED indicator blinks and gamepad powers off. Bluetooth Pairing Power on the device for the first time. LED indicator blinks in blue and gamepad enters the pairing mode. Normal Mode Gamepad works properly after the pairing is completed. LED indicator stays in blue when device is connected.
Charging current Battery life Storage temperature Operating temperature Weight Conducted Peak Output Power Charging voltage: 5V; charging current < 280 mA80h 80 hours Name and Concentration of Toxic or Hazardous Substances and Elements -20°C to +80°C 0°C to +40°C Toxic or Hazardous Substances and Elements Part Name Approx. 90g 1. 1dBm 1.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
