User's Manual

24
Height: distance from the receiver antenna to the ground point. Coordinate with Measure
To to set specific numerical values.
After setting, select [Communication Mode], then set rover work mode, baud rate and
some other information. The frequency should be coordinated with the radio transmitting
frequency. 1-9 is the fixed frequency channel, 0 is the custom channel and users can set
frequencies.
When the rover has received differential signals, there will be a RTK initializing process:
Single→Float→Fix.
4. GPRS Mode
When using GPRS Mode, it is necessary to provide a mobile card with GPRS net traffic.
Traffic package varies in different regions. So users need to contact with local mobile
provider in order to select an appropriate package.