User's Manual

40
4. After bubble and compass calibration, select [Survey Option] and set relevant
parameters.
Config Name: selections of survey point types, currently it supports Topo Point, Control
Point and Quick Point.
Obs Count: By default, Topo Point is 5, Control Point is 10 and Quick Point is 1.
Precision limit: By default, Topo Point and Control Point’s horizontal precision limit is
0.03m, vertical precision limit is 0.04m. Quick Point’s horizontal precision limit is 0.1m and
vertical precision limit is 0.2m. They can be modified manually.
Fixed Solution: when users check the box of Fixed Solution, the measuring can be done
only in fix status. If users need to survey in single or float status, do on check the box.
Abort on movement: the default value is 0.5m which can be modified.
Tilt Tolerance: the default value is 0.02m which can be modified. The range is from 0.001m
to 1m.
Frequency: 1Hz, 2Hz and 5Hz.
Use PPK: it will support PPK mode when checking the box.
Save Track: after checking the box, users need to set the track file’s name and saving path.
The software will save the track data file automatically.