User's Manual

3. Batteries and Power
Page 13
X360 GIS Reference Receiver User Guide
B.VII. REAR CONNECTORS
Connector type
Description
1
TNC
Connect to the GNSS antenna
2
CAN
Can port to connect the external
LAN,DC,USB,COM port
3
DC
For the power supply
CAN Port Connectors
1
Lemo (10-pin) Port 1
 Power from an external AC/DC power supply.
 RS-232 serial communications using a 10-
pin Lemo cable (CHC Data Cable).
 Pass-through to the mainboard without
issuing the pass-through command via this
port.