User's Manual

6. Configuring the Receiver: Other Than Keypad and Display
Page 31
X360 GIS Reference Receiver User Guide
For Latitude and Longitude:
There are mainly three methods to enter the coordinates and
shown as follows:
• Acquire Current Position: Click this button to acquire current
position obtained through single-point positioning
automatically.
• Manual Input: Manually input a known coordinates.
• From CORS: After logging in CORS, the Receiver will obtain
a coordinates based on fix solution. (See 6.2.1.5. IO Settings
menu for more details about logging in CORS.)
For Sample for Average:
Users can determine the positioning limit and sampling amount.
The positioning limit falls into two types:
• Single Solution Coordinates: Collect the coordinates of
Receiver obtained through single-point positioning.
• Fixed Solution Coordinates: Only collect coordinates of
Receiver based on fix solution.
After the configuration of positioning limit and sampling amount,
click to carry out sampling and averaging the result
will be served as the coordinates of current positon.
Also, users can click to save the curent settings.
• Receiver Reset
Use this screen to completely or partially reset the Receiver:
• Languages