User's Manual

6. Configuring the Receiver: Other Than Keypad and Display
Page 40
X360 GIS Reference Receiver User Guide
NOTE: If the Receiver and server are under the same Local Area
Network (LAN), users can use the IP address in LAN of the server with
any Port. However, if the Receiver and server are under the two
different LAN, users should use the public IP address of the server
and configure the port mapping of the server.
3. TCP/IP Server
Click the [Connect] button to the right of required TCP/IP Server the
IO Settings screen will appear select one of the connection protocols
between NTRIP and TCP configure the other related parameters 
click to save the settings and open the server.
5 Connection Protocol: NTRIP
6 Connection Protocol: TCP