User's Manual

Page 5
X360 GIS Reference Receiver User Guide
Safety Information
DC POWER SUPPLY SAFETY
WARNING – When DC voltage is applied to this Receiver through COM 1 or
COM 2 (Lemo connectors), the DC voltage must be limited to no more than
36 V DC +0% under both normal and single fault conditions. If the
recommended input voltage is exceeded, the Receiver may present an
electrical hazard.
WET LOCATION SAFETY
WARNING – This Receiver is not intended to be used in a wet location, or a
location that may become wet, when it is powered by the external DC power
supply. Use the Receiver in a wet location only when operating it on its own
internal battery.
WARNING – The external power adapter and its associated power cord and
plug are not intended to be installed outdoors, or in a wet location.
WARNING – Do not power the Receiver through external power when
operating in a wet environment or an environment that may become wet.
The power input connections must be sheltered.