BW682TY iBeeLink Everywhere IoT-WiFi Module Spec Sheet FCC ID: 2ATCG-BW682TY Version Time Author V1.0 2018-12-12 Bruce.lee V1.1 2018-12-17 Bruce.lee V1.2 2019-01-30 Bruce.lee V1.3 2019-3-27 Bruce.
iBeeLink Everywhere 1.1 Product Introduction BW682TYIs ibeelinkCompanyIntroducea highly integratedARMCortex-M4F Processor，384KB SRAM，1MB Flash Module. It Can be widely used in the fields of intelligent household equipment, remote monitoring equipment, medical equipment and the like 1.2 Main Features Support 192MHz ARM Cortex M4 MCU with FPU. Built –in 384KB SRAM/1MB（8Mbit） FLASH Support AES，DES，MD5，SHA1 Support RTC Mode and XIP Mode Working Voltage：DC 3.3V Wi-Fi Features： 1.
iBeeLink Everywhere 1.3 Electrical Parameters 1.3.1 Power Performance Remark：If Set Then DTIM=10，Low Power may be less than 500uA. 1.3.2 Work Environment 1.Suggest Operating Conditions: -20 to 80°C， 2.WiFi During Normal Work Peak Current Dot less than 400mA.
iBeeLink Everywhere 1.4 RF Performance 1.4.
iBeeLink Everywhere 5
iBeeLink Everywhere 1.5 Physical PropertiesDescription 1.5.
iBeeLink Everywhere PCB Antenna Antenna matching parameters see bellow device C17, C15, C14, L3, C16 8
iBeeLink Everywhere Note 1: This module contains only the PCB antenna described above, max. gain is 1dBi. Note 2: Any deviation(s) from the defined parameters of the antenna trace, as described by the instructions, require that the host product manufacturer must notify the module grantee that they wish to change the antenna trace design.
iBeeLink Everywhere 1.5.2 Module Size Specifications PIN Function Description Remarks： All GPIO Function Can be Configuration by software in SDK.
iBeeLink Everywhere 1.5.4 Application attention 1. Power –On Sequence 2.
iBeeLink Everywhere The reference circuit is as follows： FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
iBeeLink Everywhere operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module.
iBeeLink Everywhere Contact Information: ShangHaiiBeeLink Company Room 402-17, 4/F, Building No.5, No.2388, ChenHang Road, MinHang District, ShangHai 201114, P.R.China Contacts：Randy.
