User's Manual

Page 28 of 31
3
S AT+CSMP=17,167,0,8
Set the TP-Validity-Period as 167 （ 24
hours) ,and the SMS Data Coding Mode as
UCS2
4
R OK
Remark:
1) TP-MTI supports SMS-DELIVER, SMS-SUBMIT and SMS-STATUS-REPORT, while not support SMS-
DELIVER-REPORT, SMS-SUBMIT-REPORT and SMS-COMMAND.
2) TP-PID is 0 by default while TPDU is sending or saving.
3) The Min. length of <pdu> is 8 and the Max. length of <pdu> is 164 while TPDU is sending or saving,.
4) The parameter <stat> can only be 2 for the command AT+CMGW.
5) In TEXT Format, the parameter <fo> can be 17 and 49, the parameter <pid> can only be 0, the parameter
<dcs> can be 0~31 and the parameter <vp> can be 0~255 for AT+CSMP command
6) In TEXT Format, the parameter <stat> can only be ”STO UNSENT” for the command AT+CMGW
4.3 PHONE BOOK
4.3.1 Set Phone Book Storage Location
Phone book storage location can be set by AT command AT+CPBS. The AT command can be used in three ways.
Performing AT+CPBS? will return the current storage location of the phone book. Such as
+CPBS:<storage>[,<used>,<total>].The parameter <total> indicated how many phone numbers can be stored on the
phone. The parameter <used> indicates how many phone numbers have been stored.
Performing AT+CPBS=? will return all the storage type which the phone supports. Such as +CPBS：(list of supported
<storage>s).
We can use AT+CPBS=<storage> to set storage location. There are six types storage location. It’s follow as:
“LD” --store the recently call number which have dialed (SIM).
“MC” --store the recently call number which haven’t answered.
“RC” --store the recently call number which have been answered.
“ON” -- store the phone number of itself.
“ME” --NVRAM storage
“SM” --SIM storage
4.3.2 Read Phonebook entries
When you want to read phonebook entries, you can use AT command AT+CPBR.
Performing AT+CPBR=? will list of supported index, phone number length and text length.
Performing AT+CPBR=<index1>[,<index2>] will return the content of the phonebook entry of index1. If we use