User Manual

z MS: this operation sign and MR MC are the stored operation

signs. The operation sign is stored order, namely, the current

operation number and operation results will be stored in EMS

memory. But it has no operation function and can not fulfill

any operation, therefore, it will not breach the current display

contents. Note: it can not store multiple data, and the re-saved

data will replace last stored data. The same data can be used

for many times.

z MR: the MR function will be displayed when the data is as

stored type. This operation sign and MS MC are the stored

operation signs. The operation sign is output order, namely, the

data in EMS memory will be exsufflated from it and display in

the designated position, namely, the operation number locates

at input status. After exsufflating, the data in EMS memory

will not change. However, you need to continue to edit the

operation number after exsufflating, the input content will

place the original data.

z MC: the MC function will be displayed when the data is as

stored type. This operation sign and MS MR are the stored

operation signs. The operation sign is clear order, namely, the

data in EMS memory will be cleared away from it.

Recorder

The phone supports record and play functions.

Recorder Usage

1. Operation path: Main menu > Tools > Recorder.

2. If desired to activate the recorder, you can click [Central Key］under the

recorder status to activate recorder function, click [Central Key］to pause

the record.

3. If desirded to end the record, you can click ［Down Navigation Key］to

stop recording, the phone will store the record file into My stuff

automatically.

4. After finishing the record, you can use［Up Navigation Key］to play the

currently recorded file.