User Manual

87
account setting parameters and click “Save”.
Reset Settings
If at partial recovery of default settings, the default preset parameter settings
are restored only when the phone leaves the factory and the user-created file
info, such as contacts, message and file massage will be reserved. If at
complete recovery of default settings when the phone leaves the factory, the
user-created file info, such as contacts, message and file massage and so on
will be deleted. Note: you may lose the existing contents at original
purchase.
1. Operation path: Main menu > Settings > Default Settings > Restore
specific /Restore all.
2. Input the phone password. The original password of the phone is 0000
when the phone leaves the factory.
3. Click the OK to determine the operation.
4. After the phone is reset, it will return to the stand-by window.
FAQs and Troubleshooting Solution
Please carry on the following straightforward check prior to contact with a
professional post-sale service in order to save your time and unnecessary
expenses.
The phone cannot be started up
z Check whether the power key is pressed and held continuously.
z Check whether the battery is contacted well or not. Please firstly
remove the battery and refit it, then re-power on the device.
z Check whether the battery is run up or not. Please recharge it.
There is a piece of info displayed upon powering on the phone
z Input the phone lock password: select a function of automatically