User Manual

91
Health & Safety Information
RF/SAR Information
Your phone is a low-energy wireless receiver. Upon powering it on, the
phone will emit a low-level radio frequency (RF).
All governments around the world use the national safety directives framed
by specialized scientific organizations, such as ICNIRP and IEEE. These
directives have established an approved level of radio waves exposure to
common population. The approved level includes any metrological deviation,
such as age and health levels, providing a guarantee within a safe range for
human being.
The specific absorption rate (SAR) is a measurement unit of body-absorbed
wireless wave quantity when the phone is used. The SAR value is instituted
according to the highest energy level validated in the lab status. The true
SAR level when the phone is operated will be far lower than this level. The
nearer the phone is from a base station, the lower is the energy emitted by
the phone.
The SAR levels of different models of phones will vary possibly. In order to
ensure the subscriber safe and healthful, the phone is designed and
manufactured by abiding by the Wireless Exposure Directive.
The SAR limit fit for the public radio wave is 2.0watt/kg (W/kg) per 10
body issues. After test, the phone conforms to this limit.
Battery
Do not use the damaged adapter or battery.
Please use the battery correctly, do not make the battery short circuit, or
otherwise produced heat will cause the fire.
Prohibit putting the battery under an elevated temperature or into the fire, or
otherwise the battery will explode.
Should return the waste battery to the supplier or place at the designated