7KLV HTXLSPHQW FRPSOLHV ZLWK )&& UDGLDWLRQ H[SRVXUH OLPLWV VHW IRUWK IRU DQ XQFRQWUROOHG HQYLURQPHQW 7KH GHYLFH KDV EHHQ HYDOXDWHG WR PHHW JHQHUDO 5) H[SRVXUH UHTXLUHPHQW 7KH GHYLFH FDQ EH XVHG LQ SRUWDEOH H[SRVXUH FRQGLWLRQ ZLWKRXW UHVWULFWLRQ
The wave length of the 2.4GHz is much shorter than that of the conventional frequencies, it is very susceptible to loss of signal which results in a receiving error. To obtain the best results, please refer to the following instructions; 1.The antenna must be kept as straight as possible. Otherwise it will reduce the effective range. 2.The antenna should be perpendicular to the model. Larger models can have large metal objects that can attenuate the RF signal.
Steering neutral adjustments can be made by moving the steering trim lever to the left or right. When you install a servo, always check to be sure the servo is at its neutral position. Adjust the servo horn position and linkage so both are parallel. Be sure the steering trim on the transmitter is at the neutral position. Steering Trim Lever Trim Operation And Maximum Travel Changing the trim can affect the overall settings.
Please note the setup must based on pair procedure well. 1. Turn the power switch on the transmitter & receiver to the ON position, the LED on transmitter & receiver are continuously lit. 2.