Data Sheet
Table Of Contents
- Abstract
- 1. Introduction
- 2. Characteristic
- 3. Pin Definition
- 4. System memory space
- 5. ATE（RF Test Mode）
- 5.1. ATE Command
- 5.1.1. Start MP mode
- 5.1.2. Stop MP mode
- 5.1.3. Set Tx rate
- 5.1.4. Set operational channel
- 5.1.5. Set operational bandwidth
- 5.1.6. Set Tx power
- 5.1.7. Set antenna for Tx
- 5.1.8. Set antenna for Rx
- 5.1.9. Start air Rx mode
- 5.1.10. Start continuous Tx mode
- 5.1.11. Query air Rx statistics
- 5.1.12. Reset air Tx/Rx statistics
- 5.2. Example Command
- 5.1. ATE Command
- 6. Flash Programing
- 7. Electrical parameters
- 8. Antenna Information
- 9. Assembly size and PCB package
- 10. Production Guidelines
- 11. FCC and IC Information
- 11.1. FCC Warning
- 11.2. IC warning
- 11.3. Trace antenna designs
- 11.4. RF exposure considerations
- 11.5. Antennas
- 11.6. Label and compliance information
- 11.7. Information on test modes and additional testing requirements5
- 11.8. Additional testing, Part 15 Subpart B disclaimer
- 11.9. The module is limited to OEM installation ONLY.
- 11.10. The OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove or install module.
- 11.11. The module is limited to installation in mobile or fixed applications
- 12. Package and Label
- Appendix 1: Sales and Technical Support Information
EMC328x Series Wireless Module Data Manual
Copyright of Shanghai MXCHIP Information Technology Co., Ltd.
14
Table 6 Flash Storage space partition
Name
Description
Start Address
Size
KM0 Boot
KM0 kernel bootloader
0x0800_0000
20 Kbytes
Backup
System data backup area
0x0800_2000
4 Kbytes
System Data
System data
0x0800_3000
4 Kbytes
KM4 Boot
KM4 kernel bootloader
0x0800_4000
8 Kbytes
APP1
Application partition 1, when the OTA is upgraded,
switch boot with APP2.
0x0800_6000
1504 Kbytes
KV
Key/Value data storage area
0x0817_E000
16 Kbytes
BT FTL
Bluetooth binding information storage area
0x0818_2000
12 Kbytes
APP2
Application partition 2, when the OTA is upgraded,
the boot is switched with APP1.
0x0818_8000
1504 Kbytes
USER
User use partition
0x0830_0000
1024 Kbytes