Data Sheet
Table Of Contents
- Abstract
- 1. Introduction
- 2. Characteristics
- 3. Pin Definition
- 4. System memory Space
- 5. ATE（RF Test Mode）
- 5.1. Wi-Fi ATE Command
- 5.1.1. Start MP mode
- 5.1.2. Stop MP mode
- 5.1.3. Set Tx rate
- 5.1.4. Set operational channel
- 5.1.5. Set operational bandwidth
- 5.1.6. Set Tx power
- 5.1.7. Set antenna for Tx
- 5.1.8. Set antenna for Rx
- 5.1.9. Start air Rx mode
- 5.1.10. Start continuous Tx mode
- 5.1.11. Query air Rx statistics
- 5.1.12. Reset air Tx/Rx statistics
- 5.2. Bluetooth ATE Command（TBD）
- 5.3. Example Command
- 5.1. Wi-Fi ATE Command
- 6. Flash Programming
- 7. Electrical Parameters
- 8. RF Parameter
- 9. Antenna Information
- 10. Dimensions and Production Guidance
- 11. Production Guidelines
- 12. FCC and IC Information
- 12.1. FCC Warning
- 12.2. IC warning
- 12.3. Trace antenna designs
- 12.4. RF exposure considerations
- 12.5. Antennas
- 12.6. Label and compliance information
- 12.7. Information on test modes and additional testing requirements5
- 12.8. Additional testing, Part 15 Subpart B disclaimer
- 12.9. The module is limited to OEM installation ONLY.
- 12.10. The OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove or install module.
- 12.11. The module is limited to installation in mobile or fixed applications
- 13. Packaging and Label Information
- 14. Sales and Technical Support Information
EMC3380 Series Wireless Module Data Manual
Copyright of Shanghai MXCHIP Information Technology Co., Ltd.
40
8.2.3.4 IEEE802.11n HT40(5G) mode
Table 22 EMC3380 IEEE802.11n-HT40(5G) RX/TX Characteristics Parameters
Item
Description
Mode
IEEE802.11n(5G) HT40
Channel
CH36 to CH165
Data Rates
MCS0/1/2/3/4/5/6/7, Max.135Mbps
TX Characteristics
Min.
Typical.
Max.
Unit
Transmitter Output Power
11n Target Power@MCS0
11.5
13
14.5
dBm
11n Target Power@MCS7
10.5
12
13.5
dBm
Spectrum Mask @ target power
fc +/- 11MHz
-
-
-20
dBr
fc +/- 20MHz
-
-
-28
dBr
fc > +/-30MHz
-45
dBr
Frequency Error
-10
-2
+10
ppm
Constellation Error (peak EVM) @target power
MCS0
-
-28
-5
dBm
MCS7
-
-30
-27
dBm
RX Characteristics
Min.
Typical.
Max.
Unit
Minimum Input Level Sensitivity
MCS0 (FER≦10%)
-
-89
-89
dBm
MCS7 (FER≦10%)
-
-69
-69
dBm