User's Manual
PropertyofTCPInc
ProprietaryandConfidential
damage
3)Ramprate2C/min 3)Remainfullfunctionalatsameperformance;
noappearancedamage
4)80thermalcycles4)Solidsolderjoint
2 ThermalCycling(Operating)0
degCto45degC
1)Ramprateat0.5DegC/Min 5 4 1)Allthepartsnormally
2)Dwelltime3hrs2)Rapidramptosurfaceanyweakjointsno
damage
3)12cycles3)Remainfullfunctionalatsameperformance;
noappearancedamage
4)Solidsolderjoint
3 StorageTest 1)High/LowTemperatureTestatlowHumidity
(60C,20%RH,‐10C)
7 2Remainfullfunctionalatsameperformance;
noappearancedamage
2)High/LowTemperatureTestathighHumidity(60C,
80%RH,‐10C)
4 DropTest
1) Height of drop: 1m (Free drop onto the wooden floor)
3
1) The function of key components should be
normal after the test.
2) Number of drop: one time on 6 faces (left, right, front, rear,
bottom and top side).
2) Appearance shouldn't be cracked or other
damage.
3) DUT status: with battery inserted
3) Battery cover or battery separate from
handset is allowed (if any)
4) It's acceptable that recover the separation
between upper and bottom panels except
crack.
5 Keypad/ButtonLifeTest
1) Test times: 20,000 times with metal dome
4
1) The function of key components should be
normal after the test.
2) Force: 200gf
3) Frequency: 4.8Hz
4) Test Sample Status: Power-off
6 BatteryLifeTest
a) Measure current/voltage of the tested unit when 1)Batteries
just installed and 2) The 5 LEDs turn ON before the test.
1
b) Using the group button “1-4” on the remote to pair with a
light-bulb.
c) After pairing, select the group button then press the on/off
button. You should see the light-bulb turn on and off as well.
C:\Documents
and Settings\Ad
C:\Documents
and Settings\Ad