User's Manual

3 of 9 rev 1.2
The APP will remember up to 100 bulbs and new bulbs may be added at any time. It is
a simple 3 step process: Install / Scan / Control
1. Install - Install the new bulb. Be sure it is receiving power.
2. Scan - Scan for the new bulb with the APP. You may do this by selecting the Scan
button on the Home Page, or the Refresh button on the various bulb lists in the APP.
3. Control - When you see the bulb flashing, this lets you know your APP has found
the bulb. Enter then name and select control as you did with your first bulb.
Controlling Bulbs
The APP has many tips for the various features and controls. It also comes with
common Questions and Answers for bulb control.
There is no limit to the number of devices that can use the Colorspree APP. However,
only one device may be connected to a bulb at the same time.
New bulbs learn the pin of your APP. You may control other bulbs with different PINS if
you change your APP pin.
The various features and controls for the Colorspree LED bulbs can be seen below:
Home Screen
Provides control of the various features of the bulb.
Allows a user to select a group of bulbs to control - up to
10 bulbs per group.
A Scan button is provided to search for bulbs in the area.
Menu for accessing the Tools, Music, and Timer features
of the APP and bulb.
Multiple types of bulbs may be controlled individually or as
a group.
Create multiple groups. The active groups is indicated
with a Green icon.