User's Manual

26
b. Press the sync button on the Gateway once to enable the connection. The
activity indicator begins to display a clockwise rotating pattern.
c. When the light bulbs are connected to your Gateway, they turn on to full
brightness. Press the sync button on the Gateway again to stop the network
search process (otherwise the Gateway will stop the search process
automatically in two and half minutes after finding the most recent light bulb).
6. If a light fixture has a dimmer control (not recommended), set the dimmer level to full brightness.
7. Leave the light fixture switches ON so that power is available to the light bulbs.
5. Set up Light Bulbs in Application
With your light bulbs, Gateway, and application installed, you can use your smart device to set up the lights on
your network:
1. Open the application on your smart device. The application automatically finds the light bulbs
connected to the Gateway and prompts you to set them up: