User's Manual

66
1. Press the Group Number button for the lighting group you want to turn on or off. If you want to turn on
or off ALL lighting groups, press the 1-4 button.
2. Press the On/Off button. If the lights were previously off, they will turn on. If the lights were previously
on, they will turn off.
Note: The previously selected group (or all groups, if selected) remains the active group on the remote control. To take action
on that same group again, you do not have to press the group button again.
Brightening and Dimming Lights
You can brighten and dim your lights even if they are not connected to a fixture with a dimmer switch. CFL light
bulbs, which typically do not brighten or dim, can also brighten and dim on your network. To set the brightness
level of lights, you must set the level for an entire lighting group:
1. Press the Group Number button for the lighting group you want to dim or brighten. If you want to dim or
brighten ALL lighting groups, press the 1-4 button.
2. To dim the lights in the selected group(s), press the down side of the dimmer button (it has an off bulb
label on it ) Release the button when the lights reach the level you want.
3. To brighten the lights in the selected group(s), press the up side of the dimmer button (it has an on bulb
label on it). Release the button when the lights reach the level you want. They automatically stop when
they reach full brightness.
The lights in the group will remember the latest brightness level when you turn them off and on.