User's Manual

When the light bulbs have been removed from the network, they will brighten and dim, at which time
you can add them to your new network.
2. Install the Gateway
Since the Gateway connects to your home network router, make sure you have space near your router where
you can place the Gateway. You can also mount the Gateway to your wall (discussed in the next section). Use
the following steps to install the gateway:
1. Make sure your router is already connected to your
home network.
2. Connect the Gateway to any available port in your
router using the included Ethernet cable.
3. Power the Gateway by plugging it into an electrical
outlet using the included power adapter. The
Gateway illuminates while it is attempting to
connect to the Internet.
4. Verify that the Gateway is connected. The
Gateway is connected when both the network indicator and the Internet indicator turn off, the sync
button is green, and the power indicator is white