User's Manual

6. If a light fixture has a dimmer control (not recommended), set the dimmer level to full brightness.
7. Leave the light fixture switches ON so that power is available to the light bulbs.
5. Set up Light Bulbs in Application
With your light bulbs, Gateway, and application installed, you can use your smart device to set up the lights on
your network:
1. Open the application on your smart device. The application automatically finds the light bulbs
connected to the Gateway and prompts you to set them up:
2. Tap Yes. Your smart device then walks you through setting up each new light bulb.
3. Look for the light bulb that is dimming and fading. This is the light bulb you are currently configuring
on your smart device.