User's Manual

Managing Lights and Fixtures
Adding Light Bulbs to Your Network
When you first set up your lighting network, the application walks you through setting up all of the light bulbs in
your kit. If you add a new light bulb to your network, you must connect to and set up that light bulb. When you
perform this procedure to add new light bulbs, be sure you can access your Gateway since it is part of the
installation process. The following procedure allows you to add one or more light bulbs:
1. Turn power OFF to the light fixtures where you will be installing the new network light bulbs.
2. Remove any existing standard light bulbs from the light fixtures.
Unselected Lighting Group
The light bulb does not belong to a
lighting group if the number is not
shaded.
Selected Lighting Group
The light bulb belongs to a lighting
group if the number is shaded.