User's Manual

approximately five seconds. When the indicator light turns off, your remote control is connected to the
Gateway.
6. Press the sync button on the Gateway again to stop the network search process (otherwise the
Gateway will stop the search process automatically in two and a half minutes).
Note: The remote control loses the ability to add bulbs to the lighting network, delete light bulbs from the lighting network, and
clone a remote control once it joins the lighting Gateway.
Turning Lights On and Off
To turn lights on and off, you must turn on and off an entire lighting group:
1. Press the Group Number button for the lighting group you want to turn on or off. If you want to turn on
or off ALL lighting groups, press the 1-4 button.
2. Press the On/Off button. If the lights were previously off, they will turn on. If the lights were previously
on, they will turn off.
Note: The previously selected group (or all groups, if selected) remains the active group on the remote control. To take action
on that same group again, you do not have to press the group button again.