User's Manual

1110
PROCESS INDICATOR AND DESCRIPTION
Initial Remote Control Setup Primary indicator flashes steadily: During the process of installing batteries for the first
time, the remote control is determining the best signal for your lighting system.
Adding Light Bulbs to Network Group number indicator flashes steadily: The corresponding lighting group is the
active group for the new light bulbs to join.
Primary indicator flashes rapidly: The remote control has found a new light bulb
within range. After the light bulb is successfully added to the network, the indicator
stops flashing.
Primary indicator turns on solid: The light bulb has been successfully added
to the network.
Removing Light Bulbs from
Network
Group number indicator and primary indicator flash slowly for 30 seconds: One or
more light bulbs have been removed.
Working with One Lighting
Group
Group number indicator turns on, primary indicator remains off: The corresponding
lighting group has been selected, and its last state was off.
Group number indicator and primary indicator turn on: The corresponding lighting
group has been selected, and its last state was something other than off (for example,
lighting group was on or was dimmed to a certain level).
Working with All Lighting Groups All group number indicators turn on, and primary indicator remains off: All lighting
groups have been selected, and their last state was off.
All group number indicators and primary indicator turn on: All lighting groups have
been selected, and their last state was something other than off (for example, lighting
groups were on or were dimmed to a certain level).
Cloning the Remote Control Primary indicator flashes steadily: The remote control is in cloning mode.
Primary indicator flashes rapidly: The remote controls are transferring data between
each other.
Primary indicator turns on solid: Both remote controls have finished the cloning
process successfully.
Group number indicators flash steadily for 2 seconds: The cloning process timed out
or failed.
INDICATORS
The remote control has four group number
indicator lights and one primary status
indicator light that display the following
patterns to show you the remote control’s
status during different processes: