User's Manual

remote control operation

You can perform several tasks with the remote control, including:

• Turning lights on and off

• Brightening and dimming lights

• Changing the lighting group to which a light bulb is assigned

• Cloning the remote control to a new one

• Replacing batteries

• Resetting the remote control to factory default settings

Note: Some tasks require pressing the Program button, which is located inside the

battery compartment on the back of the remote control. Be sure to press this button

only as directed in the instructions. Pressing it an additional time during remote

control programming mode immediately cancels the current operation.

Turning Lights on and Off

To turn lights on and off, you must turn on and off an entire

lighting group:

01. Press the Group Number button for the lighting group

you want to turn on or off. If you want to turn on or off ALL

lighting groups, press the 1- 4 button.

02. Press the On/Off button. If the lights were previously off,

they will turn on. If the lights were previously on, they will

turn off.