User's Manual

01. On the ORIGINAL remote control:
a. Press and hold the Program button.
b. While pressing the Program button, press the On/Off but-
ton three times.
c. Release the Program button. The primary indicator indi-
cator starts flashing steadily.
02. On the NEW remote control:
a. Press and hold the Program button.
b. While pressing the Program button, press the 1- 4 button
three times.
c. Release the PROGRAM button. The primary LED indicator
starts flashing rapidly.
Once the data transfer process begins between the remote
controls, the primary LED indicator on the original remote control
starts flashing rapidly.
03. When the new remote control has finished obtaining the
network information, the primary LED indicators on both re-
mote controls light solid for five seconds and then turn off.
04. You can now use the new remote control the same as you
do your original. All of the lighting groups and settings are
the same.
If the remote controls’ group number indicator lights flash steadily
for two seconds, the cloning process timed out or failed and you
must start over.
17