User's Manual

troubleshooting
If you are having problems with your lighting system, refer to the
following sections for possible troubleshooting solutions.
Light Bulb Not Responding During Installation
When you add a new light bulb to the network (or if you add a
previously existing light bulb that you removed from the network),
the light bulb should brighten and dim during the installation
process to indicate that it is searching for a network. If for any
reason the light bulb does not brighten and dim (if it remains full
bright), then turn power to the light fixture off and on four times
consecutively to reset the light bulb. The light bulb should then
start to brighten and dim once it is reset, which is usually within
10 seconds after the fourth off/on cycle.
25