User's Manual

Light Bulb Accidentally Removed from Network
It is possible for a network light bulb to be accidentally removed
from the network. For example, if someone turns power off and
on four times consecutively to the light fixture, the attached light
bulb will reset and remove itself from the network. If this happens,
follow the procedure in the Light Bulb Tasks chapter to add a new
light bulb to the network.
Resetting Your Light Bulbs
If you are unable to fix issues that arise with your lighting system,
you can reset your light bulbs as a last resort. To do so, follow the
procedure in the Light Bulb Tasks chapter to remove light bulbs
from the network, followed by the procedure to add a new light
bulb to the network.
Problems with Remote Control
Depending on the problem you are having with the remote con-
trol, there are several possible solutions:
• Replace batteries. If the remote control is not functioning
and the indicator lights do not light when you press the
buttons, then the batteries may need replacement. Refer to
the Remote Control Operation chapter for instructions on
inserting new batteries into the remote control.
• Turn power to light fixture on. If you manually turn the
power switch off for a light fixture, then power will not be
available to the light bulb when you use the remote control
26