Manualshelf

Operation Manual

ManualsBrandsShanghai SAND Information Technology System ManualsElectronicsMobile payment terminal with GSM/GPRS and RFID reader
11121314151617181920
1.0 Printing system setting
Select 1.PRINT SETTING and confirm it, host will print configuration information of the system.
The printing list is as follows: (the left column are the content, while the right are instrucitons)
2003/10/17 11:16 The already set Date and time in host
HARDWARE SETTING Hardware configuration
MODEL PS100 Model PS100
VER 2.70 Version 2.70
MSN 270030802001 Host serial No. 270030802001
PSN 100030802001 Pinpad serial No. 100030802001
ICC EXIST IC card reader exist
ETHERNET NOT EXIST Ethernet not exist
GPRS NOT EXIST GPRS not exist
EPSON M190 Printer: Epson M190
MODEM SETTING MODEM setting
MODEM 73K222 MODEM model 73K222
ETHERNET SETTING Ethernet setting
MAC
00:50:58:00:00:37
MAC address
00:50:58:00:00:37
ETH IP SETTING Ethernet IP setting
DHCP DISABLE DHCP invalid
IP 172.16.40.77 IP 172.16.40.77
MASK 255.255.0.0 Network mask 255.255.0.0
GATE 172.16.1.1 Gateway 172.16.1.1
DNS 172.16.1.1 DNS 172.16.1.1
CONTACT SETTING Contact setting
64836666 64836666(Bank linking calling center
phone No.)
Table4-3
Note! :
Printing system setting may do good to learn the configuration of the host and check all
configurations have setting correctly. The above content is just for reference.
1.1 Date/Time setting
Select 2.DATE/TIME SETTING and confirms it, then the host prompt to set date, it displays as
follows”
04/03/16 13:24 04/03/16 13:24
YY/MM/DD YY/MM/DD
Table4-4
Input the data by way of keyboard; show the year, month, and day with two digits, such as 041316
refers to March 16, 2004. The host will prompt to set the times after the confirmation, it displays as
follows: