Operation Manual

The system would prompt to input Pinpad serial No. after confirmation, the interface is as follows:
04/03/16 13:24 04/03/16 13:24
PINPAD SERIAL NO： Pinpad serial No.
1000403020001 1000403020001
Table4-10
1.2.4 IC card reader setting
After the completion setting and confirmation of serial No., host will prompt to set IC card reader,
the interface is as follows:
04/03/16 13:24 04/03/16 13:24
ICC READER EXIST？ IC card reader exist?
1 1
1-Y 0-N 1-Yes 0-No
Table4-11
The setting of IC card reader involves only whether the reader exist, if there is a card reader in the
host, input “1”, if not, input “0”.
Note! :
False setting will lead to the OS error reporting or IC card works abnormally!!
1.2.5 Ethernet setting
After the setting and confirmation of IC card reader, the host will prompt to set the Ethernet, the
interface is as follows:
04/03/16 13:24 04/03/16 13:24
ETHERNET EXIST？ Whether has an Ethernet function?
1 1
1-Y 0-N 1-Yes 0-No
Table4-12
If there is Ethernet, input “1”; if not, input “0”.
Note! :
1. The setting of Ethernet here is different from that in the main menu of the configuration menu.
2. False setting will lead to the OS error reporting or Ethernet works abnormally!!
1.2.6 GSM setting
After the complete setting and confirmation of Ethernet, the host will prompt to setting GPRS, the
interface is as follows:
04/03/16 13:24 04/03/16 13:24
GSM EXIST？ GSM exist or not?
0 0
1-Y 0-N 1-Yes 0-No
Table4-13
If the host supports the GSM function, input “1”; if not, input “0”.
Note! :
False setting will lead to a GSM setting failure or hardware works abnormals!!