Operation Manual

04/03/16 13:24 04/03/16 13:24
SYNC ADJUST Sync adjust
3 3
SAMSUNG SMP130U SAMSUNG SMP130U（Pixel printer with
teeth hole paper printer model）
Table4-20
This setting is to adjust the tidiness of printing fonts; the value is capable form 0 to 9, press “Enter”
to save after completion.
Note! :
Better take a printing test before this setting, and then set the value as per the deviation of printing
fonts. One more printing test is required after the setting of one value to ensure a tidy effect of the
printing fonts.
1.5 Modem setting
Select 6.MODEM SETTING and confirm, the display interface is as follows:
04/03/16 13:24 04/03/16 13:24
MODEM MODEL Modem model
1 1
0-NONE 1-73K222 0-None 1-73K222
2-73K224 3-73M2901 2-73K224 3-73M2901
4-CMX868 5-CMX866 4-CMX868 5-CMX866
Table4-21
After confirmed the model, input its correspondent numeric key setting model, such as: input “1”
refers to the model of 73K222.
1.6 Ethernet setting
Select 1.ETHERNET SETTING of the second item in the system setting menu and confirm it, the
display interface is as follows:
04/03/16 13:24 04/03/16 13:24
MAC MAC address
005058000038 005058000038
Tabel4-22
Input the MAV address of the machine and save it after confirmation.
Note! :
The MAC address of each Ethernet POS is excusive, there should be no mistake during inputting,
and there is a tag of MAC in the inner top of the paper store of host.
1.7 Ethernet IP setting
Select 2.ETH IP SETTING of the second item in system setting menu and confirm it, the display
interface is as follows: