Operation Manual

1.8 GSM SETTING
Option system setup menu in page 2: GSM SETTING and confirm
04/03/16 13:24 04/03/16 13:24
DEBUG OPTION Debug option
11001111
11001111 （ Represent open or close
relevant setting）
Table 4-28
Input according to above data, and then press ENTER to set module speed:
04/03/16 13:24 04/03/16 13:24
MODULE SPEED Module speed
115200
115200（The communication speed is
115200）
Table 4-29
Set the communication speed as 115200 and confirm, then set GPRS ALWAYS ONLINE
04/03/16 13:24 04/03/16 13:24
GPRS ALWAYS ONLINE GPRS always online?
1 1 (Always online)
1-Y 0-N 1-Yes 2-No
图 4-30
Genetally, set as always online, i.e. input “1”, after confirmation set APN:
04/03/16 13:24 04/03/16 13:24
APN APN
M-POS.CUPSH.SH M-POS.CUPSH.SH (APN address)
Table 4-31
After input APN address (APN address is different as per their different application scale, cash card
directly use “M-POS.CUPSH.SH”, while membership card system use “CMNET”) according to
above, set user name and password, here user name and password are contemporarily empty, and
need not input, just press ENTER is ok, after confirmation host will rum AT command
automatically to initial set GPRS module, it will prompt “SAVED OK!” after completion.
Note! :
1. If there is error during the host use AT command to initiate the module, it can be reset, but can
GPRS work normally when there comes out “SAVED OK!”
2. If it prompts“GSM NOT EXIST”, it means that this machine do not have the Ethernet function
or the “GSM setting” under “hardware setting” in part 1.2 in this chapter;
3. the GSM card of GPRS function must be inserted and opened in GSM swipe before this setting;
1.9 Contact setting
Select 4. CONTACT SETTING of the second item in the system setting menu, the display interface
is as follows:
04/03/16 13:24 04/03/16 13:24
HELP TELEPHONE： Help line
64836666 64836666（Calling center phone No.）
Table4-32