Operation Manual

04/03/16 13:24 04/03/16 13:24
TEST MENU 2 Test menu 2
1．UART 1．Serial test
2．PINPAD 2．Pinpad test
3．MODEM 3．Modem test
4．GPRS 4．GPRS test
5．ETHERNET 5．Ethernet test
6．MEMORY 6．Memory test
Table3-2
04/03/16 13:24 04/03/16 13:24
TEST MENU 3 Test menu 3
1．BATTERY 1．Battery test
Table3-2
Continuous press F2 (line shift) in the page2 of the test menu to enter into page 3 of the test menu.
2 MMI (display test)
Select1．MMI in the hardware test main menu and press “Enter” to enter into MMI test menu as
follows:
04/03/16 13:24 04/03/16 13:24
MMI TEST MENU 1 Display test menu 1
1．AUTOMATIC TEST 1．Automatic test
2．MANUAL TEST 2．Manual test
3．CONSUMER LCD TEST 3．Customer display test
2.1 AUTOMATIC TEST
Select1．AUTOMATIC TES and press “Enter” to begin to test. LCD will turn off the backlight,
refresh test, and the display icons on the sub screen one after another, and it shifts a test item in
every 3 seconds. One can also press “Enter” to shift to the next test item quickly, press “Cancel” to
exit test directly.
2.2 MANUAL TEST
Can only press “Enter” shift to the next test item when it is manual test, similarly, press “Cancel” to
exit the test directly.
Note! :
When display test, backlight turning off should be normal, contrast should be even, there should not
be lack of row and column during refresh display, character display should be normal and in order,
all items on the sub screen can be displayed, and the screen should not wink or darken.
3 Print test
Select2．PRINTER and press “Enter” to begin to test, and display as follows:
04/03/16 13:24 04/03/16 13:24
PRINTER TYPE： Printer type
SAMSUNG SMP130U Samsung SMP130U
PRESS KEY TO CONTINUE Press any key to begin to test
Note! : Prompt printer type, since different printer will display its correspondent type, please pay