Operation Manual

attention to check it;
Pixel printer: EPSON M190
Thermal printer: APS ELM205-LV
Pixel printer with teeth hole paper printer: SAMSUNG SMP130U
Press any key to begin to print, the host will display as follows after completion:
04/03/16 13:24 04/03/16 13:24
PRINTER TYPE： Printer type
SAMSUNG SMP130U Samsung SMP130U
TEST OK！ Test OK!
CHECK PRINTER PAPER Check printing pater
PRESS KEY TO CONTINUE Press any key to begin to test
Press any key to return to the hardware test main menu after the test is completed.
Note! :
Pay attention to the printing condition at the moment, printer should work normally, paper printed
out should not be lack of rows or columns, the printed characters should be clear and in order, and
there should not be system halted and restart etc abnormal phenomena..
4 Keyboard test
Select3．KEYBOARD and press “Enter” to begin to test, the host will display as follows:
04/03/16 13:24 04/03/16 13:24
KEYBOARD TEST Keyboard test
5
TWO CANCEL TO EXIT Press “Cancel” twice to exit
The pressing time will display on the screen (like “5” in the above table), press “Cancel” twice to
exit.
Note! :
(1) Notice that it should be comfortable when pressing keys, there should not be sort of friction or
resistance, and keys should be rebound well, key surface should clean and silk screen should be
clear, keys pressing time should correspondent to the pressing silk screen, buzzer should have a
prompt sound when pressing.
5 Magnetic card test
Select4．MAGNETIC and press “Enter” to begin to test, and the host will display as follows:
04/03/16 13:24 04/03/16 13:24
SWIPE MAGNETIC CARD Please swipe the magnetic card
PRESS CANCEL TO EXIT Press “Cancel” to exit
Host displays information of every track when swipe the card in this condition
04/03/16 13:24 04/03/16 13:24
TRACK 2 0 LEN 37 Magnetic track 2 0 Length 37
60142825110350708=00 60142825110350708=00
00220589535000000 00220589535000000 (Magnetic track
information）