Operation Manual

04/03/16 13:24 04/03/16 13:24
SELECT 1PAY．SYS．DDF01 Select file
6F15840E315041592E53 6F15840E315041592E53
59532E4444463031A503 59532E4444463031A503
8801019000 8801019000
90 00 90 00
REMOVE CARD Remove card
3B6F000．．．and 6F15840．．．are Resetting response and select file data respectively, since there
would be diversity as per of difference of cards;
90 00 refers to the card is in correct condition, other figures all mean incorrect.
6.2 Synchronous card test
Select 2．SYNC CARD TEST to begin to test the card, and enter into the following interface:
04/03/16 13:24 04/03/16 13:24
INSERT 4442 CARD Insert 4442 card
PRESS CANCEL TO EXIT Press “Cancel” to exit
Insert 442 test card and display as follows:
04/03/16 13:24 04/03/16 13:24
FIRST 32 BYTES DATA Initial 32 byte data
00000000888012000000 00000000888012000000
00113130300301172003 00113130300301172003
01170000000000310000 01170000000000310000
BF65 BF65
REMOVE CARD Remove card
0000000088… refers to select file data, there would be diversity as per the difference of cards;
Note! :
When taking these two tests, inserting card should be smooth and without friction and resistance,
and read the data in the card correctly, there should not be abnormal phenomena such as no
response, system halted, and resetting when reading the card.
7 SAM card test
Select 6．SAM and press “Enter” to begin to test, the host would display as follows:
04/03/16 13:24 04/03/16 13:24
SAM NO.： SAM slot No.
PRESS CANCEL TO EXIT Press “Cancel” to exit