GL100 User Manual GL100 A-GPS Locator User Manual 0
GL100 User Manual CONTENTS 1 Introduction .................................................................................................................... 2 2 Main Functions............................................................................................................... 3 2.1 A-GPS Scenario...............................................................................................................3 2.2 Alarm Scenario.......................................................................
GL100 User Manual Section 15.19 Labelling requirements This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Section 15.
GL100 User Manual 1 Introduction GL100 is a powerful A-GPS Locator with mini size, light weight, anti-water and superior sensitive receiving ability, fast TTFF which works on GSM frequencies 850/900/1800/1900. GL100 is designed for many applications such as pets or human body, the specific target to be tracked, the management for specific purpose and target. 2 Main Functions • • • • • • A-GPS Position Fixed time reporting Emergency Alarm Geo-fencing Alarm Remote Control Alarm Lower power Alarm 2.
GL100 User Manual • Low power alarm The message of low power notification will be sent before the battery dies out. 3 Parameters Technical Specifications Quad-Band:GSM850/900/1800/1900MHz Compliant to GSM phase 2/2+ Class 4 (2W @ 900MHz) Class 1 (1W @ 1800/1900MHz Max out RF power: 33.0dBm±2dBm Dynamic input range: -15 ~ -102dBm Receiving delicacy: Class П RBER≤2％（-102dBm） Stability of frequency: Superior to 2.5ppm Max frequency error: ±0.
GL100 User Manual 4 GL100 Start-up 4.1 Accessories 1．GL100 Locator 2．Mini USB cable 3．AC power adapter 4.2 Charging the battery z Please connect AC power adapter with GL100 for battery charging. z Insert the AC power adapter into the power. z During charging, the red LED 2 is blinking slowly. When the charge is completed, the green LED 2 is lighting. z You can also charge the battery by USB cable which connects GL100 with the PC. z Charging about 3 hours.
GL100 User Manual 5 Product Overview 5.1 Appearance 5.2 Button/MINI USB interface Description Button Function description Power Key Turn on / Turn off GL100 Function Key Use this Key to switch the two operating modes: Geofence mode or SOS mode • Geofence mode (default) Press the Key twice within 2 sec. to ON/OFF the Geofence mode. • SOS mode Keep pressing the key for 3 sec.
GL100 User Manual 5.3 Two three-color LEDs Description There are two three-color LEDs in GL100. Each LED shows red, green and blue 3 colors for indicating different state of GL100. In order to be easier to understand the 6 lights, we call them Red LED 1, Green LED 1, Blue LED 1 and Red LED 2, Green LED 2, Blue LED 2. • Red LED 1 ——Power LED State Meaning Turn on • • • GL100 is turned on or turned off. When the GL100 terminal receives the effective protocol commands.
GL100 User Manual 6 GL100 Manager Setup Wizard 1. Double click“Pl2303 drive.exe” to install USB-Serial driver. 1. Use Mini USB cable to connect GL100 and PC. 2. Turn on GL100. Double click “GL100 Manager.exe”, 3. Set right Com Number and Baud rate. Note: The Com Number must be identical with Prolific USB-to-Serial com port. 4.
GL100 User Manual Illuminate： 1. The zone of function list Display the functions list. If one of the options is selected, the option parameters will be displayed in the right frame. 2. The zone of function setting The zone of function setting is used to set and view the parameters of the function. If you want to download the function parameters, the check box “Enable download this function” should be selected. 3. The state display zone Display the state of operation and suggestion.
GL100 User Manual 7 Device Operation 7.1 Turn on/ Turn off • Turn on: Press the Power key at least 3 seconds and release to turn on the GL100. At this time, Red LED 1 will light on for 2~3 seconds. Then Green LED 1 starts to blink quickly to search the GSM network. After the GSM network is registered, it turns to be slowly. • Turn off: Press the Power key at least 3 seconds; Red LED 1 will light on for 2~3 seconds and then turn off, it indicates that the GL100 is turned off. 7.
GL100 User Manual 8 Displaying the location on map z z When receiving the location information of GL100, you can display the location on map. Open the IE Browser and input http://maps.google.com to link the Google Map website, enter the Latitude and Longitude information which received, you will see the GL100’s position on the map.
GL100 User Manual 9 Troubleshooting and Safety info z Troubleshooting Trouble Reason After GL100 is turned The SIM inserted. on, the RED LED 1 flashes quickly always. Solution card is not Please insert the SIM card into GL100. The signal is too weak; GL100 can’t register to the network. Please move GL100 into a stronger signal place. z Safety info ¾ ¾ ¾ ¾ ¾ Please do not remove the battery when GL100 is charging or it connects with PC.
