User's Manual

Model Number: X
1
X
2
N
1
N
2
N
3
– N
4
X
3
Model
Functions
Standard & Mini Reader
Keypad Reader
Display Reader
Configurable Functions
Re-configure Window
5 seconds (Default) or Half an hour after Power up
Reader Output Format
CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID
Wiegand Plus Width
Different choices to fit with different Controller’s requirements
Keypad Output
N/A
Definable
Definable
Buzzer Control
Reader & Controller control (Default) or Controller control only
LED/Back lit Control
Define different LED color response base on Green LED
N/A
Display Clock
Synchronization.
N/A
N/A
 H/W reset
 Via RS485 TimeSyn S/W
Technical Specifications
Typical Read range
2 – 3 cm
Reader Standard Output
Wiegand (RS232 & RS485 optional)
Standard Keypad output
N/A
Wiegand with 4 bits burst
Wiegand with 4 bits burst
Display
N/A
N/A
OLED Display
Display Message
N/A
N/A
 Access Granted, Access
Denied, Enter PIN;
 Time;
 Card Number
Wiring Distance
150m (22 AWG with shielded cable)
120m (22 AWG with shielded cable)
Operating Specification:
Operating Voltage
10 - 15VDC
Operating Current
150mA (max)
Operating Temperature
-30℃-70℃
Exterior dimension (Mini)
84.05*54.05*16.5mm
Case material
PC+ABS
Standard Color
Black
Operating Humidity
10% - 90%
Weight (Mini)
160g
RF Technologies
Reader Appearance and Function
X
1
X
2
MD = DesFire Technology
N
1
3 = Normal Reader ; 5 = Display Reader
N
2
2 = Normal Size
8 = Mini Size
N
3
2 = Read UID / Card Number
3 = Sector reading (Only Mifare)
N
4
3 = Terminal (for Display Reader)
8 = Pigtail
X
3
N = No Number pad; K = Number pad