Use Manual

Design & Technologies

Number pad use “touching sensor”, the latest

technology and individual number backlit when

touch.

Economical mullion mounts type.

Support on-site Reader Configuration Card to

change certain parameters.

Door Bell function for Number pad reader.

Tamper protection

Design with customer logo is possible.

Mifare & ISO14443A-4 UID Slender Series Reader

APINcanbesetinsidethecardto

authenticate with the reader so that “Card +

PIN” mode can be implemented without

Easily see under dark environment.

Could be use as a door location

Friendly Installation

“Touch” number pad does not

carry any moving parts, which

implies more durable.

All weather proof design with

IP65 certificate.

Universal back plate allows

thereaderbeinstalledon

different size of gang box.

Non-drop bottom screw made

servicing handier.

All input and output signals are

protected against static

charges.

Reverse power protection.

Stainless steel Security

screw is an option

All inputs are 12Vdc

protected.

Read both CSN and Sector of Mifare card and

FULL UID of Mifare Plus and DesFire card.

PAGE 1
Mifare & ISO14443A-4 UID Slender Series Reader Design & Technologies Read both CSN and Sector of Mifare card and Economical mullion mounts type. FULL UID of Mifare Plus and DesFire card. Support on-site Reader Configuration Card to Design with customer logo is possible. change certain parameters. Door Bell function for Number pad reader. Tamper protection Number pad use “touching sensor”, the latest technology and individual number backlit when touch.
PAGE 2
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
PAGE 3
Model Functions Standard Reader Keypad Reader Configurable Functions Re-configure Window 5 seconds (Default) or Half an hour after Power up Reader Output Format CSN/UID 32bits, 34bits, 56bits (backward/forward), file content reading for programmed ID Wiegand Plus Width Keypad Output Buzzer Control LED/Back lit Control Different choices to fit with different Controller’s requirements N/A Definable Reader & Controller control (Default) or Controller control only Define different LED color response b