User's Manual

SUNMI Technology
Page 5/16
3.2 Access Point
3.2.1 Introduction
The access point (AP) for SUNMI smart ESLs is used to connect ESL equipment with SUNMI
digital store. The image and the instruction emitted by the digital store server are transmitted to the
wireless access point through the Ethernet, and the access point is further distributed to the ESL
through the wireless communication of the 2.4 G frequency band, so that the cloud change price and
the ESL refresh can be realized.
The following table shows the basic specifications of the wireless access point for smart ESLs:
Product name
Electronic shelf label AP
Product model
BL010
Marketing model
SLAP1
Input Power
DC 5V/1A or PoE
PoE Specification
IEEE 802.3af
Ethernet interface
RJ45 100M
Wireless communication band
2.4GHz
Oversize
156mm*156mm*25mm
Installation
Ceiling/ Wall/ Desktop Placement
Coverage radius
25m
Supported quantity of ESLs
Up to 10,000 single AP
The relevant interface description on the wireless access point for smart ESLs is as follows:
Ports
Description
1
Power light
⚫ White flicker: during access point startup
⚫ Normally White ON: access point is connected to the server and is working
properly
⚫ Normally Red ON: access point cannot connect to the server
①
②
③
④
⑤
FCC ID 2AH25BL010