SUNMI Technology ELECTRONIC SHELF LABEL BL201 BLA01/BLA02 BL202/BL203
SUNMI Technology Implementation Process of SUNMI ELECTRONIC SHELF LABEL(ESL) Shanghai Sunmi Technology Co.,Ltd. Version: V1.1 Sep.
SUNMI Technology Contens Revision History .................................................................................................................................. 3 1 Preliminary Work .............................................................................................................................. 4 2 Product docking ................................................................................................................................ 4 3 Equipment Installation ...............
SUNMI Technology Revision History Issued Date Revised Contents Version 2019-07-28 Draft V1.0 2019-09-15 English version V1.1 FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules.
SUNMI Technology 1 Preliminary Work Before implementing a formal deployment, the following preparations need to be completed: 1. Business cooperation process; 2. Statistics on the number and type of store ESLs; 3. Statistics on the installation mode of store ESLs (the type and quantity of guide rails and clamps); 4. Location determination of the access point installation (focus on the network wiring); 5. Cloud deployment mode confirmation (SaaS or private cloud).
SUNMI Technology 3.2 Access Point 3.2.1 Introduction The access point (AP) for SUNMI smart ESLs is used to connect ESL equipment with SUNMI digital store. The image and the instruction emitted by the digital store server are transmitted to the wireless access point through the Ethernet, and the access point is further distributed to the ESL through the wireless communication of the 2.4 G frequency band, so that the cloud change price and the ESL refresh can be realized.
SUNMI Technology 2 Reset button Press for 5 seconds to restore the access point to the factory state 3 Internet port RJ45 Ethernet port with indicator light, support for PoE power supply 4 Power port Power adapter port to support independent power supply 5 Installation hooks Bring its own detachable hooks so that the access point supports a variety of installation methods 3.2.2 Base Installation 3.2.2.
SUNMI Technology If multiple access points are needed, it is necessary to ensure that each access point signal has an overlapping area, and each label is at least within the coverage of more than one access point. If there are walls, columns, air pipes, refrigerators, etc., between the access point and the label, the wireless signal will be affected and attenuated to a certain extent. When the access point is installed, it should avoid the above objects as far as possible.
SUNMI Technology operations. 3.3 Labels and Accessories The label cannot be installed independently, it needs to be installed with various types of accessories to the shelf, basket rack and pile head. 4 Software Operation Software configuration and usage include operations on the SUNMI digital store website and on the SUNMI ESL APP of PDA. In SUNMI digital store, you need to complete: 1. Register an account in SUNMI digital store; 2. Set up docking of product information; 3.
SUNMI Technology 4.1 SUNMI digital store The operations of SUNMI digital store need to be complete before the deployment of equipment installation. 4.1.1 Register an account in SUNMI digital store Visit website store.sunmi.com through Chrome, Firefox, QQ browser and 360 browser on computer to register account. If already registered, step over to sign in. Create the company and store after sign-in. Step over if the account already created. 4.1.
SUNMI Technology Enter the [Docking ERP] function, select the ERP platform that has been docked in the previous work, and input the authentication information (which can be obtained on the page under some part of the ERP software, and some other part needs to be obtained by the ERP manufacturer). The storage can complete the docking of the product library and start drawing the products.
SUNMI Technology 4.1.3 Template design Template is to present product information for ESL. Users can present through user-defined function. Enter [ESL > Template Management], you can edit existing templates, or create new templates for design. Templates are classified according to size and color. an ESL of a certain size can only use a template of that size, a constant temperature ESL can use black and white red, black and white templates, and a low temperature ESL can only use black and white templates.
SUNMI Technology 2. Go to the APP system page, click [AP management > Add AP], then start searching access point signal with l2. In order to ensure that the signal strength of the access point is strong enough to be connected by L2, it is necessary to search as close as possible to the access point.
SUNMI Technology 3. Select the access point that needs to be added (according to the signal strength or MAC address, the scanned MAC address is the same as the MAC address on the bottom nameplate of the access point) to enter the process of the access point adding and configuring. First of all, you need to set up the access point Internet access mode, you can choose to automatically obtain IP (DHCP) or manually input IP (static IP). The automatic acquisition of IP (DHCP) mode can be used generally.
SUNMI Technology and complete binding. [Select ESL] can be achieved through the bar code on the L2 ESL (the bar code is the unique identified ID), or through NFC by close L2 to the ESL to obtain the ID. SUNMI ESL support NFC, which can obtain the ESL ID through NFC on the PDA, or reset the ESL device. [Select Template] is to choose the designed template in SUNMI digital store previously. [Select Product] can be realized directly by scanning product bar code.
SUNMI Technology After completing the binding of all products and ESL, return to the home page of the SUNMI ESL APP. When the number of ESLs to be pushed becomes 0, that means all the ESLs are completed and the ESL system is deployed for the first time. If it is any modification in need later, directly modify in the ERP, then the product information will be immediately synchronized to the SUNMI digital store, and sent to the ESL.
SUNMI Technology 4.2.4 Product inquiry Inquire through the product number / name / bar code, and the bar code of the product binding ESL. Enter the product details page to see the product information, as well as the ESL bound to the product, click on the flash lamp to allow the ESL flashing immediately.
