User's Manual

Installation Steps for the VESA Bracket
Remove the base
1. Put the display flat on the desktop
with its face down.
2. Rotate the metal base to a vertical state.
3. Remove the lower cover of the bracket.
Remove the base
4. Rotate the metal base to a horizonal state.
5. Remove the upper cover of the bracket.
Remove the base
6. Unscrew the four M4 screws with a
screwdriver and complete the removal
of base.
Install VESA accessories
1. Put the VESA bracket aligning to four screw holes
according to required direction.
2. Use the four M4 screws removed from the base
to fix the VESA bracket.
3. Install the bracket on the wall or desk
in accordance with VESA bracket manual book
and complete the installation of VESA suspension
bracket.
1
3
2
6
4
5
Note: This machine only supports the installation for VESA
MIS-D (100
×
100mm) suspension bracket. The VESA
bracket is an optional accessory which needs to be
purchased by the user.