User's Manual

NT210 User’s manual
- 8 -
2) Insert the connector of DC power cable into the interface at the back of printer;
Figure 4.3-1
3) Connect with the power supply.
Caution:
 Please use the recommended power adapter or its equivalents.
 When connecting or disconnecting the power cable, always hold the connector cover and avoid dragging it
with force.
 Avoid pulling the cable of power adapter or power input cable, otherwise the cable may be damaged or
broken, causing a risk of fire or electric shock.
 Do not place the cable of power adapter or power input cable near a heating device; otherwise the cover of
the cable may melt, causing a risk of fire or electric shock.
 If the printer will not be used for a long time, disconnect the power cable for safety.
4.4 Connect the interface cable
1) Ensure that the printer is powered off
2) Insert the interface cable into corresponding interface, and fix the connector with screw as shown in
Figure 4.4-1;
3) Connect the other end of interface cable to the host.
Figure 4.4-1