POS System User Manual Book Before operating this unit please read these instructions completely and save them
Three configurations of T2s Introduction to POS “Take dual 15.6〃as sample” Main Display 15.6" Main Display (L1561) 15'6" Main Display + 10'1" Customer Display (L1562) 15.6" Dual-Display L1563 Simplified Setting Paper exit of printer Cover handle of printer Paper roller cover of printer USB interface Power button It only takes a few steps to turn on this intelligent commercial POS machine: 1 2 3 Press "Power" button, then the display lights on.
POS Machine Installation Interface cover SIM card slot TF card slot Customer Display Micro USB debugging port Debugging function button 2 Cable cover 1 SIM card slot 3 Note: The machine must be in the power-off status during inserting or removing the SIM card. If plugging or removing is done in the power-on status, it may cause a machine stoppage.
Wrong Operation Paper Jammed Troubleshooting 1 Firstly, open outward the cover of the printer cutter Please do not tilt the printing paper. Please do not get printing paper caught in the aperture of the paper case cover by accident. 2 Secondly, adjust the cutter knob upwards until it is removed. Do not pull the printing paper roll in the paper case tray too long. Common Troubleshooting Symptom Please do not put loose paper into the paper case.
Specification Operating system Android 9.0 Processor Qualcomm Snapdragon Qcta-core Main-screen 15.6-inch FHD1920×1080 resolution Memory 32GB ROM + 3GB RAM; 64GB ROM + 4GB RAM Touchscreen Multi-touch capacitive screen WiFi Dual-band WiFi, 802.11a/b/g/n/ac(2.4GHz/5GHz) supported Bluetooth Bluetooth 5.0 BLE and iBeacon supported Printer 80mm printer head, paper roll diameter of 80mm, with an auto-cutter Speaker 1x 1.
Precautions Warning Important Safety Instructions · Please insert the AC plug into the AC outlet according to the identifying input on the power adapter; · Avoid installing or using during thunder and lightning,other wise lightning stroke may occur; · It is prohibited to use the device in any places with potential explosive gases; · Cut off the power immediately if there is abnormal smell, overheating or smog； · Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers; · Do not
POS System User Manual This Manual shall be read carefully before use and remain in safe hands.
Quick Installation Guide “Take main screen as sample” Three options for sub screen of intelligent POS machine 1. Rotate the display to horizontal 15.6〃main screen only （L1571） 15.6〃main screen+10.1〃 customer screen （L1572） 2. Open the port cover 15.6〃main screen+15.6〃 customer screen （L1573） 3. Connect the power interface of the adapter to the power port at the bottom of the mainframe. And insert the other side of the adapter to electric supply sockets 4.
Product Introduction “Take main screen as sample” Card slot cover 15.6” Slot reader interface Display USB interface Power, Pilot Light 5V TXD RXD GND Interface cover TF card slot Debug key Micro USB debug port Port cover Metal Base USB interface Headset jack USB interface Serial interface Cash drawer interface LAN interface Power port Power USB Interface Slot reader interface Micro USB debug port, debug key In the state of power off, a short press turns on the POS machine.
Installation Steps for the VESA Bracket “Single screen configuration only” 2 6 4 3 5 1 Remove the base Remove the base Remove the base Install VESA accessories 1. Put the display flat on the desktop with its face down. 4. Rotate the metal base to horizontal. 6. Unscrew the four M4 screws with a screwdriver and complete the removal of base. 1. Place the VESA bracket aligning the four screw holes according to directions. 2. Rotate the metal base to vertical. 3.
Minimal Settings Only a few steps to turn on the intelligent business equipment. Basic Specifications Operating system Android 9.0 Processor Qualcomm snapdragon Qcta-core processor Display resolution 15.6’’ resolution HD 1920 x 1080 1 Press the power button and the screen will power on. Enter the first start-up screen and follow the prompts. Two options for Internet access are available. Storage 32GB ROM + 3GB RAM or 64GB ROM + 4GB RAM 2 Wi-Fi setting.
Precautions Warning Important Safety Instructions · Please insert the AC plug into the AC outlet accord ing to the identifying input on the power adapter; · Avoid installing or using during thunder and lightning,other wise lightning stroke may occur; · Cut off the power immediately if there is abnormal smell, overheating or smog! · It is prohibited to use the device in any places with potential explosive gases; · Nonprofessionals shall not open the power adapter anyhow so as to avoid dangers; · The devi
EU Regulatory Conformance Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the radio equipment type is in compliance with Technical features and characteristic the product includes the following features and characteristics� Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.sunmi.com Notice: Observe the national local regulations in the location where the device is to beused.
