User's Manual

UTT Technologies Chapter 7 Advanced
http://www.uttglobal.com Page 116
7.2.3 IP/MAC Binding List
Figure 7-11 IP/MAC Binding List
Add One or More IP/MAC Bindings: To add one or more IP/MAC bindings, first click
the Add button to go to the IP/MAC Binding Settings page shown in Figure 7- 14,
next configure them, lastly click the Save button.
View IP/MAC Binding(s): When you have configured one or more IP/MAC bindings,
you can view them in the IP/MAC Binding List.
Modify an IP/MAC Binding: To modify a configured IP/MAC binding, click its User
Name hyperlink or icon, the related information will be displayed in the setup
page shown in Figure 7- 12. Then modify it, and click the Save button.
Figure 7-12 Modifying an IP/MAC Binding
The Allow check box is used to allow or block a user matching an IP/MAC binding
from accessing the Wireless Router and Internet. To allow the user matching the
IP/MAC binding to access, select the IP/MAC binding’s Allow check box; else clear it.
Delete IP/MAC binding(s): There are three ways to delete IP/MAC bindings.
1. To delete a IP/MAC binding, directly click its
icon.
2. To delete more than one IP/MAC binding at a time, select the leftmost check
boxes of the bindings that you want to delete, and then click the Delete button.
3. To delete all the IP/MAC bindings at a time, directly click the Delete All button.