User's Manual

UTT Technologies Chapter 7 Advanced
http://www.uttglobal.com Page 120
7.2.6.2 How to Configure an Internet Whitelist
To configure an Internet whitelist, follow these steps:
Step 1 Go to the Advanced > IP/MAC Binding page, and click the Add button to go to
the IP/MAC Binding Settings page.
Step 2 Specify the legal users by creating the IP/MAC bindings: Add these users’ IP
and MAC address pairs into the IP/MAC Binding List. By default, an IP/MAC
binding’s Allow check box is checked, which means that the user matching the
IP/MAC binding can access the Wireless Router and Internet, so please leave
the default value. Refer to Section 7.2.4 IP/MAC Binding Settings for detailed
information.
Step 3 Clear the Allow Undefined LAN PCs check box to block all the undefined
users from accessing the Wireless Router and Internet.
For example, if you want to allow a local computer with IP address 192.168.1.2 and MAC
address 0021859b4544 to access the Wireless Router and Internet, you can add its
IP/MAC address pair into the IP/MAC Binding List, see Figure 7- 15. The binding’s Allow
check box is checked by default, so please leave the default value.
Figure 7-15 IP/MAC Binding List - Example 1
7.2.6.3 How to Configure an Internet Blacklist
To configure an Internet blacklist, follow these steps:
Step 1 Go to the Advanced > IP/MAC Binding page, and click the Add button to go to
the IP/MAC Binding Settings page.
Step 2 Specify the illegal users by creating the IP/MAC bindings. There are two
methods (Refer to Section 7.2.4 IP/MAC Binding Settings for detailed
information.):