User's Manual

UTT Technologies Chapter 10 VPN
http://www.uttglobal.com Page 165
10.1.6 PPTP Sessions Limit
The Wireless Router supports two concurrent PPTP sessions (i.e., tunnels) at most. If
there are already two active PPTP sessions on the Wireless Router, the system will reject
any request for creating a new PPTP session and prompt you.
10.2 PPTP Client Settings
Figure 10-5 PPTP Client Settings
Enable: It allows you to enable or disable the PPTP client entry. The default value is
checked, which means the PPTP client entry is in effect. If you want to disable the
entry temporarily instead of deleting it, please clear the check box.
Tunnel Name: It specifies a unique name of the PPTP tunnel. It is used to identify
multiple tunnels.
User Name: It specifies a unique user name of the PPTP/L2TP client. It must be
between 1 and 31 characters long. The remote PPTP/L2TP server will use the User
Name and Password to identify the client.
Password: It specifies a password of the PPTP/L2TP client.
PPP Authentication: It specifies the PPP authentication mode by which the remote
PPTP server authenticates the PPTP client. The available options are None, PAP,
CHAP and Either.
• PAP: Password Authentication Protocol.
• CHAP: Challenge Handshake Authentication Protocol.