User's Manual

UTT Technologies Chapter 10 VPN
http://www.uttglobal.com Page 166
• None: It means that no authentication is performed.
• Either: It means that the Wireless Router will automatically negotiate it with the
remote VPN appliance.
Remote Subnet IP: It specifies the subnet IP address of the remote network. In most
cases, you may enter the IP address of the remote VPN appliance’s LAN interface.
Remote Subnet Mask: It specifies the subnet mask of the remote network.
Tunnel Server IP/Domain Name: It specifies the IP address or domain name of the
remote PPTP/L2TP server. In most cases, you may enter the WAN IP address or
domain name of the remote VPN appliance.
Save: Click to save your changes.
Cancel: Click to revert to the last saved settings.
Back: ClicktogobacktothePPTP Client List.
10.3 PPTP Client List
After you have configured a PPTP/L2TP client entry, you can view its configuration and
status in the PPTP Client List, see Figure 10- 6.
Figure 10-6 PPTP Client List
Figure 10-7 PPTP Client List (Continue)
After the Wireless Router has successfully established a PPTP tunnel with the remote