User's Manual

UTT Technologies Chapter 11 System Administration
http://www.uttglobal.com Page 174
11.3.3 Reset to Factory Defaults
Figure 11- 6 Reset to Factory Defaults
Reset: To reset the Wireless Router to factory default settings, click the Reset button,
and then restart the Wireless Router.
Note
1. After performing the reset operation, you must manually restart the Wireless
Router in order for the default settings to take effect.
2. The reset operation will clear all of the Wireless Router’s custom settings. It is
strongly recommended that you backup the current configuration before resetting.
3. The default administrator user name and password both are admin (case
sensitive). The default LAN IP address is 192.168.1.1 with a subnet mask of
255.255.255.0.