User's Manual

UTT Technologies Chapter 5 Network
http://www.uttglobal.com Page
63
5.4.2.3 How to Add Static DHCP Entries
To add one or more static DHCP entries, follow these steps:
Step 1 Go to the Network > DHCP Server > Static DHCP page.
Step 2 Click the Add button to go to the Static DHCP Settings page, and then specify
the User Name, IP Address and MAC Address,lastlyclicktheSave button.
Step 3 Now you can view the static DHCP entry in the Static DHCP List.
Step 4 To add another static DHCP entry, please repeat the above steps.
Note
If you want to delete static DHCP entry(s), please follow the ways described in
Section 5.4.2.2 Static DHCP List.
5.4.3 DHCP Client List
Figure 5-20 DHCP Client List
IP Address: It displays the IP address assigned to the DHCP client.
Subnet Mask: It displays the subnet mask of the current IP address.
MAC Address: It displays the MAC address of the DHCP client.
Lease Left: It displays the time remaining (in seconds) until the current IP address
lease expires.