Installation Instructions

The Switch Module defaults to rocker switch types, but
also supports button switches.
N line
L line
N line
L line
N line
L line
GND line
Click the "Add Device" button in the
Device tab of the Terncy app.
If the module is out of the junction box, long press the
button for 6 secs. The device will be found after 3 secs.
If the module is installed inside the junction box, nd
the device by toggling the rocker switch 5 times in 2
secs, or pressing the button switch 10 times in 4 secs.
1.
2.
3.
Visit the device details page of the Switch Module
in the Terncy app.
Click Input 1 or Input 2 to select the switch type.
Install the Switch Module behind the switch panel to
enable voice control, schedules, automations, and
other functionality.
1.
2.
Set Up The Accessory Again
Set Switch Type
Application Scenarios Application Scenarios Application Scenarios
1. Smarten your switch
Install the Switch Module behind the socket panel to
enable voice control, schedules, automations, and
other functionality.
2. Smarten your socket
Visit https://www.xiaoyan.io/blog/posts/sm01_usage
for more usage, such as wall switch for hotel scenario.
Connect the Switch Module between the light strip
and the adaptor to to allow for voice control,
schedules, automations, and other functionality.
3. Smarten your Light Strip
Contact Us
Online Support: http://www.xiaoyan.io/service
E-mail: [e-mail]
Manufacturer: Shanghai Xiaoyan Technology Co., Ltd.
WeChat ocial account
Notes 1
Notes 2
Home Center is required to enable the Switch
Module to work with HomeKit technology. Visit
http://www.xiaoyan.io for more details.
Do not soak or wash your devices.
Keep products away from re, high temperatures
or any other extreme environment.
1.
2.
Device
Add Device
3012
：
Add Device
Switch Module
Scanning
new devices
Light 1
3012
：
Add Device
Add
Scanning
new devices
2798-01
连接其他设备
取消
Home
Add Home Center
Add End Point
Accessory
Manual of
Terncy Switch Module
Lights
Input
Input 1
Input 1
Rocker Switch
Button Switch
Switch type
Rocker/Button Switch
D.C. Input
D.C. Output